PMC 6 XBD Stúdíóhátalarar (Par)

1.998.900 kr.

Sérpöntun.

Adding a PMC8 SUB unit to the PMC6 easily upgrades the system to a twin-cabinet XBD monitor system.

Ekki til á lager

Flokkar: , , Merkimiði:

Lýsing

In the case of the PMC6, the bass response of the resulting XBD monitor combination is extended from 39Hz down to 25Hz — giving genuine midfield monitor performance in a compact installation — and the speaker becomes a true three-way design. Also, since the mid-bass driver no longer handles the lowest bass frequencies, distortion is reduced, headroom is extended, and the mid-range frequencies gain extra clarity to lend vocals still greater realism and depth.

It’s simple to configure the PMC6 XBD system; connect the input directly to the PMC6, and add an AES3 digital cable to carry the main monitor ‘through’ output down to the PMC8 SUB. The two cabinets can be connected either to a LAN or directly to each other via their network ports. When you select the dedicated ‘XBD’ mode the DSP seamlessly combines both units into a single, larger-scale monitor. Further detailed configuration can be carried out from the rear-panel controls or using the intuitive SoundAlign™ browser-based software via the LAN connection, where both speakers appear as a single PMC6 XBD unit when linked.

  • 3-way active, twin cabinet, mid-field reference monitor with ATL™ bass loading
  • Frequency response: 25Hz – 25kHz (- 3dB @1m full space, on-axis)
  • State-of-the-art Class-D amplifiers: HF 200W, LF 200W, SUB(XBD) 300W
  • Analogue/AES3 digital input (16/24-bit, 18 -192kHz sample rate)
  • Digital ‘through’ output (AES3 24-bit 96kHz)
  • SoundAlign™ network control interface for single or group EQ & settings
  • Sophisticated DSP crossover, driver protection, EQ, and delay/polarity options

STEVE GENEWICK

Interview with Genewick, Senior Engineer Capitol Studios – from the launch party of the new active range at Just for the Record studios, Los Angeles 2021

PMC6 SPECIFICATIONS

TypeActive 2-way nearfield reference monitor with ATL™ bass loading

Drive Unit ComplementLF PMC 150mm (6”) studio 6 driver

HF PMC 27mm (1”) soft dome tweeter

Effective ATL™ Length1.8m (5.9ft)

Frequency Response39Hz – 25kHz (- 3dB) (@1m full space, on-axis)

Sensitivity+4dBu input signal = 98dB SPL @ 1m

Max continuous SPL106dB @1m(Half space value calculated as +3dB from full space measurement. Unweighted input, 20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration)

Max Peak SPL118dB @1m(Half space value calculated as +3dB from full space measurement. Unweighted input, 20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration)

DirectivityH +/-60 degreesV +50/-40 degrees (-6dB off axis @10kHz)

InputXLR switchable between analogue & digital AES3Analogue input– +20/+24dBu max. input level (selectable)– 22K ohm input impedanceDigital input– 16/24-bit AES3 signal, left, right or left + right– 18 – 192kHz sample rate– 110 ohm input impedanceExpansion card slot– For future connectivity upgrades

OutputXLR digital AES3 (fixed 24-bit @ 96kHz)

NetworkRJ45 for use with PMC SoundAlign web interface

FeaturesLevel Trim (+/-10dB)Orientation (portrait, landscape, auto)High-pass filter (20 – 200Hz, 12dB/Oct)Delay (0 – 30mS)Phase (normal or inverted)LF & HF shelving filters (20Hz – 20kHz, +/- 10dB, Q 0.707)Parametric EQ (5 bands, 20Hz – 20kHz, +/- 10dB)User presets (3 + factory defaults)

Latency2.4mS

Amplifier power per channelLF 1 x 200WrmsHF1 x 200Wrms

Mains100 – 240VAC auto-switching, 50-60Hz (IEC C14)

Power consumption (idle)35W

Power consumption (max)400W

Cabinet dimensions PortraitH400mm (15.7”)W 215mm (8.5”)D 372mm (14.6”)

Cabinet dimensions LandscapeH 215mm (8.5”)W 400mm (15.7”)D 372mm (14.6”)

Weight11.1kg (24.4lbs) each

Available Finishes:Studio black

PMC8 SUB SPECIFICATIONS

TypeActive subwoofer with an 8-inch bass driver and ATL™ bass loading

Drive Unit ComplementLF PMC 200mm (8”) studio 8 driver

Effective ATL™ Length3m (9.8ft)

Frequency Response25Hz – 500Hz (- 3dB) (@1m full space, on-axis)

Sensitivity+4dBu input signal = 98dB SPL @ 1m

Max continuous SPL109dB @1m(Quarter space value calculated as +3dB from half space measurement. Unweighted input, 20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration)

Max Peak SPL121dB @1m(Quarter space value calculated as +3dB from half space measurement. Unweighted input, 20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration)

InputXLR switchable between analogue & digital AES3Analogue input– +20/+24dBu max. input level (selectable)– 22K ohm input impedanceDigital input– 16/24-bit AES3 signal, left, right or left + right– 18 – 192kHz Sample Rate– 110 ohm input impedanceExpansion card slotFor future connectivity upgrades

OutputXLR digital AES3 (fixed 24-bit @ 96kHz)

NetworkRJ45 for use with PMC SoundAlign web interface

FeaturesLevel Trim (+/-10dB)High-pass/Low-pass filter (20 – 200Hz, 12dB/Oct)Delay (0 – 30mS)Phase (normal or inverted)LF & HF shelving filters (20Hz – 20kHz, +/- 10dB, Q 0.707)Parametric EQ (5 bands, 20Hz – 20kHz, +/- 10dB)User presets (3 + factory defaults)

Latency2.4mS

Amplifier power300Wrms

Mains100 – 240VAC auto-switching, 50-60Hz (IEC C14)

Power consumption (idle)25W

Power consumption (max)300W

Cabinet dimensionsH 266mm (10.5”)W 551mm (21.7”)D 440mm (17.3”)

Weight18.5kg (40.8lbs) each

Available Finishes:Studio black