PMC 6-2 XBD Stúdíóhátalarar (Par)

2.528.900 kr.

Sérpöntun.

Adding a PMC8-2 SUB unit to a PMC6-2 monitor easily reconfigures them as PMC’s renowned and flexible twin-cabinet format XBD monitor system.

Ekki til á lager

Flokkar: , , Merkimiði:

Lýsing

This system combines the PMC6-2’s unrivalled clarity and resolution with an active sub to form a perfectly integrated full-range monitoring system that is ideal for all high-end music production.
In the case of the PMC6-2, configuring it as an XBD system reinforces the bass output of the main speaker’s LF drivers, greatly increasing headroom and extending the bass down to 25Hz, creating a system with a sense of effortless capability.

Configuring the PMC6-2 XBD system is simple; connect the input directly to the PMC6-2, and add an AES3 digital cable to carry the main monitor’s ‘through’ output down to the PMC8-2 SUB. The two cabinets can be connected either to a LAN or directly to each other via their network ports. When you select the dedicated ‘XBD’ mode the DSP seamlessly combines both units into a single, larger-scale monitor. Further detailed configuration can be carried out from the rear-panel controls or using the intuitive SoundAlign™ browser-based software via the LAN connection, where both speakers appear as a single PMC6-2 XBD unit when linked.

  • 3-way active, twin cabinet, mid-field reference monitor with ATL™ bass loading
  • Frequency response: 25Hz – 25kHz (- 3dB @1m full space, on-axis)
  • State-of-the-art Class-D amplifiers: HF 400W, MF 400W, LF 2x 400W, SUB(XBD) 2 x 400W
  • Analogue / AES3 digital input (16/24-bit, 18 -192kHz sample rate)
  • Digital ‘through’ output (AES3 24-bit 96kHz)
  • SoundAlign™ network control interface for single or group EQ & settings
  • Sophisticated DSP crossover, driver protection, EQ, and delay/polarity options
  • Optional dedicated 19” floor stands

WARREN HUART

Interview with Huart, Mixer, Engineer, Producer – from the pre-launch party of the new active range at Just for the Record studios, Los Angeles 2021
One of the keys to our legendary natural, uncoloured sound is our Advanced Transmission Line (ATL) bass-loading. ATL uses energy generated by the bass unit in a much more intelligent and efficient way than speaker designs based on ported or sealed boxes. Our Laminair airflow technology further enhances ATL and improves definition, timing and eradicates unwanted air noise.
PMC 6 ATL Cutaway

PMC6-2 SPECIFICATIONS

TypeActive 3-way nearfield reference monitor with ATL™ bass loading

Drive Unit ComplementLF 2 x PMC 150mm (6”) studio 6 driversMF PMC 55mm (2”) soft dome mid-rangeHF PMC 27mm (1”) soft dome tweeter
Effective ATL™ Length2m (6.6ft)
Frequency Response33Hz – 25kHz (- 3dB) (@1m full space, on-axis)
Sensitivity+4dBu input signal = 98dB SPL @ 1m
Max continuous SPL109dB @1m(Half space value calculated as +3dB from full space measurement. Unweighted input, 20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration)
Max Peak SPL121dB @1m(Half space value calculated as +3dB from full space measurement. Unweighted input, 20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration)
DirectivityH +/-50 degreesV +60/-40 degrees (-6dB off axis @10kHz)
InputXLR switchable between analogue & digital AES3Analogue input– +20/+24dBu max. input level (selectable)– 22K ohm input impedanceDigital input– 16/24-bit AES3 signal, left, right or left + right– 18 – 192kHz Sample Rate– 110 ohm input impedanceExpansion card slot– For future connectivity upgrades
OutputXLR digital AES3 (fixed 24-bit @ 96kHz)
NetworkRJ45 for use with PMC SoundAlign web interface
FeaturesLevel Trim (+/-10dB)High-pass filter (20 – 200Hz, 12dB/Oct)Delay (0 – 30mS)Phase (normal or inverted)LF & HF shelving filters (20Hz – 20kHz, +/- 10dB, Q 0.707)Parametric EQ (5 bands, 20Hz – 20kHz, +/- 10dB)User presets (3 + factory defaults)
Latency2.4mS
Amplifier power per channelLF 2 x 400WrmsMF 1 x 400WrmsHF 1 x 400Wrms
Mains100 – 240VAC auto-switching, 50-60Hz (IEC C14)
Power consumption (idle)50W
Power consumption (max)1500W
Cabinet dimensionsH 400mm (15.7”)W 430mm (16.9”)D 372mm (14.6”)
Weight21.3kg (47lbs) each
Available Finishes:Studio black

PMC8-2 SUB SPECIFICATIONS

TypeActive subwoofer with twin 8-inch bass drivers and ATL™ bass loading

Drive Unit ComplementLF PMC 200mm (8”) studio 8 driver
Effective ATL™ Length3m (9.8ft)
Frequency Response25Hz – 500Hz (- 3dB) (@1m full space, on-axis)
Sensitivity+4dBu input signal = 98dB SPL @ 1m
Max continuous SPL109dB @1m(Quarter space value calculated as +3dB from half space measurement. Unweighted input, 20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration)
Max Peak SPL121dB @1m(Quarter space value calculated as +3dB from half space measurement. Unweighted input, 20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration)
InputXLR switchable between analogue & digital AES3Analogue input– +20/+24dBu max. input level (selectable)– 22K ohm input impedanceDigital input– 16/24-bit AES3 signal, left, right or left + right– 18 – 192kHz Sample Rate– 110 ohm input impedanceExpansion card slot– For future connectivity upgrades
OutputXLR digital AES3 (fixed 24-bit @ 96kHz)
NetworkRJ45 for use with PMC SoundAlign web interface
FeaturesLevel Trim (+/-10dB)High-pass/Low-pass filter (20 – 200Hz, 12dB/Oct)Delay (0 – 30mS)Phase (normal or inverted)LF & HF shelving filters (20Hz – 20kHz, +/- 10dB, Q 0.707)Parametric EQ (5 bands, 20Hz – 20kHz, +/- 10dB)User presets (3 + factory defaults)
Latency2.4mS
Amplifier power per channel300Wrms
Mains100 – 240VAC auto-switching, 50-60Hz (IEC C14)
Power consumption (idle)25W
Power consumption (max)300W
Cabinet dimensionsH 266mm (10.5”)W 551mm (21.7”)D 440mm (17.3”)
Weight18.5kg (40.8lbs) each
Available Finishes:Studio black

Related products